Introducing our Type 2: C2TE Slip Resistant Tile Adhesive – the perfect choice for all your tiling needs. It works on both indoor and outdoor surfaces, so you can use it for floors and walls inside your home, as well as outside areas. It is great for fixing vitrified and fully vitrified tiles, along with glass mosaic tiles, on cement-based surfaces.
The best part about this adhesive is that it is slip-resistant, which means it is perfect for places that might get wet, like bathrooms, kitchens, or even around a pool. You can trust it to keep your tiles securely in place, no matter the conditions.
At a typical room temperature of around 27°C, you have about 2 hours to work with the adhesive after mixing it with water. This gives you plenty of time to adjust the tiles and get them just right.
Within 16 to 24 hours after application, the adhesive becomes strong enough for heavy foot traffic. So, you will not have to wait too long before walking on the tiled surface.
Each 20 kg pack of our ET-222 Grey adhesive covers approximately 45 to 55 sq.ft when you use a 6mm × 6mm square notched trowel to apply a 3mm thick layer. Just remember that the actual coverage may vary based on the surface condition and how you apply it.
Trust our Etac Company’s product for reliable and long-lasting results. With our ET-222 Grey Slip Resistant Tile Adhesive, tile installation becomes easy and stress-free. Say goodbye to worries about tiles coming loose and say hello to beautiful and strong grey tiles that will elevate the beauty of your spaces.
| IS Data | ||
| Property: Test method | Requirement | Typical Value |
| Tensile Adhesion | ||
| Dry Condition Annex A(Clause 5.1) | Minimum 1 N/mm2 | 1.05 – 1.20 N/mm2 |
| Wet Condition Annex A(Clause 5.1) | Minimum 1 N/mm2 | 1.05 – 1.20 N/mm2 |
| Dry Condition Annex B(Clause 5.2) | Minimum 1 N/mm2 | 1.25 – 1.40 N/mm2 |
| Wet Condition Annex B(Clause 5.2) | Minimum 1 N/mm2 | 1.05 – 1.15 N/mm2 |
| Heat aging Annex B(Clause 5.2) | Minimum 1 N/mm2 | 1.10– 1.20 N/mm2 |
| Slip resistance Annex E (Clause 5.5) | < 0.5 mm | 0.30-0.45 mm |
Standard
ET-222 complies to IS 15477:2019 “Type 2T”.
Also complies with EN C2TE classifications
| Packing | 20 Kg |
| Colour | Grey & White |
What types of tiles can I install using ET-222?
ET-222 is suitable for fixing ceramic, porcelain, and natural stone tiles on both walls and floors in indoor and outdoor areas.
Is ET-222 water-resistant?
Yes, ET-222 offers improved water resistance than ET-111, making it ideal for wet areas like bathrooms and kitchens.
Can I use ET-222 for large-format tiles?
Yes, ET-222 is suitable for large-format tiles due to its excellent non-slip properties.
What types of tiles can I install using ET-222?
ET-222 is suitable for fixing ceramic, porcelain, and natural stone tiles on both walls and floors in indoor and outdoor areas.
Is ET-222 water-resistant?
Yes, ET-222 offers improved water resistance, making it ideal for wet areas like bathrooms and kitchens.
Can I use ET-222 for large-format tiles?
Yes, ET-222 is suitable for large-format tiles due to its excellent non-slip properties.
What is the recommended trowel size for applying ET-222?
A 6×6 mm or 10×10 mm notched trowel is recommended for ET-222, depending on the tile size and substrate condition.
Can I install tiles over existing tiles using ET-222?
Yes, ET-222 can be used to install tiles over existing tiles with proper surface preparation.
Does ET-222 require back-buttering of tiles?
Back-buttering is recommended for larger tiles to ensure full adhesive coverage.
How long can I work with ET-222 after application before it starts to set?
The open time of ET-222 is approximately 20-30 minutes, depending on environmental conditions.
Can ET-222 be used for exterior façade applications?
Yes, ET-222 can be used for exterior façade installations, provided the tiles and substrate are suitable for external use.
Can I use ET-222 for swimming pool installations?
Yes, ET-222 is suitable for swimming pool installations.
Is ET-222 suitable for underfloor heating systems?
Yes, ET-222 is compatible with underfloor heating systems when applied correctly.
Can I install natural stone tiles on an outdoor patio using ET-222?
Yes, ET-222 is suitable for fixing natural stone tiles on outdoor patios.
Can I apply ET-222 on plywood substrates for wall tiles?
ET-222 is not recommended for use on plywood substrates. Cement backer board or other suitable tile substrates should be used instead.
Can I use ET-222 for shower niches and shelves?
Yes, ET-222 is suitable for installing tiles in shower niches and shelves.
Is ET-222 suitable for installing large porcelain floor tiles in a residential bathroom?
Yes, ET-222 is well-suited for installing large porcelain floor tiles in residential bathrooms.
Can I mix ET-222 with water to adjust the consistency?
No, it is essential to mix ET-222 only with clean water, following the recommended mixing ratio for best results.
Can I use ET-222 for installing tiles on an exterior concrete patio?
Yes, ET-222 is suitable for installing tiles on an exterior concrete patio.
Can I apply ET-222 on top of existing vinyl floor tiles in a living room?
Yes, ET-222 can be used for installing tiles on top of existing vinyl floor tiles. Ensure the surface is clean, flat, and free from contaminants.
Can I use ET-222 for a shower floor with river pebble tiles?
Yes, ET-222 is suitable for installing river pebble tiles on shower floors.
Can ET-222 be used for fixing glass tiles on a bathroom accent wall?
Yes, ET-222 is compatible with glass tiles on bathroom accent walls.
How soon can I walk on tiles installed with ET-222 after grouting?
Wait at least 24 hours after grouting before walking on tiles fixed with ET-222.
Can I use ET-222 for fixing large-format porcelain tiles on an elevated balcony?
Yes, ET-222 is suitable for fixing large-format porcelain tiles on elevated balconies.
Can ET-222 be used for installing terracotta tiles on a residential patio floor?
Yes, ET-222 is suitable for installing terracotta tiles on residential patio floors.
Is ET-222 suitable for outdoor mosaic mural installations in a community park?
Yes, ET-222 can be used for outdoor mosaic mural installations in community parks.
Can I use ET-222 for installing granite tiles on a kitchen countertop?
ET-222 is not recommended for kitchen countertop installations. Please refer to our countertop-specific adhesives.
Can I use ET-222 for tiling a commercial restroom with porcelain tiles?
Yes, ET-222 is suitable for tiling commercial restrooms with porcelain tiles.
Can I use ET-222 for installing ceramic subway tiles on a kitchen backsplash?
Yes, ET-222 is suitable for installing ceramic subway tiles on kitchen backsplashes.
Can ET-222 be used for fixing glass mosaic tiles on a swimming pool water feature?
Yes, ET-222 can be used for glass mosaic tiles on swimming pool water features.
Is ET-222 recommended for installing large-format porcelain tiles on an office building lobby floor?
Yes, ET-222 is suitable for large-format porcelain tiles in office building lobbies.
Can I use ET-222 for a decorative tile installation on an accent wall in a residential living room?
Yes, ET-222 is suitable for decorative tile installations on residential living room accent walls.
Can ET-222 be used for installing cement tiles in a café’s outdoor patio space?
Yes, ET-222 is compatible with cement tiles for café outdoor patio installations.
Can I use ET-222 for installing outdoor mosaic tiles on a public art installation?
Yes, ET-222 is suitable for outdoor mosaic tiles on public art installations.
Is ET-222 recommended for installing large-format porcelain tiles in a residential garage?
Yes, ET-222 is suitable for large-format porcelain tile installations in residential garages.
Can I apply ET-222 on a wooden subfloor for a residential kitchen tile installation?
ET-222 is not recommended for wooden subfloors. Use a suitable cement backer board instead.
Can ET-222 be used for installing ceramic tiles on a commercial office restroom floor?
Yes, ET-222 is recommended for ceramic tile installations in commercial office restrooms.
Can I use ET-222 for fixing marble tiles on a residential entryway floor?
Yes, ET-222 is suitable for fixing marble tiles in residential entryway floors.